Through wall
Chimney kit with a straight connection through a sauna wall to the exterior stack

The chimney connects to the exterior stack through the cedar wall.

Sauna chimney kit · Side-exit stack

Chimney Out the Side

CHISIDSide-exit chimney stack

The CHISID carries the flue through the sauna wall and continues vertically outside. It is the right starting point when the project already has the required heater-side connection; choose the SB225 when a complete 90° elbow route is needed.

$1,058.50CAD
Explore in 3D

Pay online for eligible in-stock items, or submit your order without payment. Our team will contact you to confirm availability and delivery.

One in-stock heater with eligible small accessories ships free in Canada to the closest Manitoulin terminal. Home delivery and parcel shipping are calculated separately. Remote areas or orders without verified shipping details require a quote.

Sauna heater, heater-side elbow or connector, sauna stones, floor shield and wall heat shields are not included. Narvi heaters require a separate adapter.

  • Compatibility checkWe can review the heater and planned route before fulfilment.
  • Canada-wide supportShipping options are confirmed for the destination.

Interactive model

Explore the chimney kit in 3D

Rotate the model to see the chimney connect to the back of the Harvia M3 and the bracket attach to the outside wall. Switch to Exploded View to see the kit parts.

Product overview

Side-exit chimney stack

The CHISID side-exit sauna chimney kit routes a compatible 115 mm wood-heater flue through the wall before rising vertically outside the sauna. Its insulated exterior sections, tee and wall bracket create a stable outside stack while the wall pass-through and finishing pieces complete the transition.

This package does not include the heater-side 90° elbow shown in the complete SB225 system. Review the proposed route with ZAPARA before ordering so the correct connector or adapter can be matched to the exact heater. Narvi heaters require a separate adapter.

System components

What’s included

Components follow the manufacturer’s system diagram. Final quantities and section lengths should be checked for your installation.

  1. 01Chimney cap
  2. 02Two nominal 1,000 mm insulated sections (about 40″ each)
  3. 0316 in insulated tee section
  4. 04Wall support bracket
  5. 05Lower clean-out or drain component
  6. 06Wall pass-through and finishing components
  7. 07Exterior stack connection pieces shown in the manufacturer diagram

Technical reference

Chimney kit specifications

Installation route
Through the wall, then vertically outside
Heater connection
115 mm (4.52 in)
Insulated chimney outside
8 in (203 mm)
Insulation
1.75 in manufacturer specification
Floor to chimney cap in the reference drawing
116″ (295 cm), with the connection centre 22½″ above the sauna floor

Before you order

Confirm the complete installation route

01

Match the heater

Confirm the exact heater model, flue diameter and outlet position. A matching nominal diameter does not by itself confirm the installation.

02

Review the structure

Plan every ceiling, roof or wall penetration around the actual framing, finishes and required heat protection.

03

Follow the approved documents

The heater and chimney instructions plus applicable building and fire requirements govern the final clearances and assembly.

This route is a strong fit for

  • Projects that cannot use a straight roof penetration
  • Layouts with the required heater-side connector already specified
  • Harvia, HUUM, LeisureCraft and other compatible 115 mm outlets after model verification

Compare routes

All sauna chimney kits

The three products solve different chimney paths. Choose the route first, then verify it against the heater and building.

Common questions

CHISID chimney kit FAQ

Does this kit include the heater-side elbow?

No. CHISID is the side-exit stack and wall-transition package. Select SB225 when the complete route must include the 90° heater-side elbow.

Which heater brands can use this chimney?

The manufacturer lists compatibility with many 115 mm outlets, including LeisureCraft, HUUM and Harvia. The exact heater model and connection route still need to be verified. Narvi requires a separate adapter.

Can I use the reference dimensions as required clearances?

No. Reference dimensions describe the system. Follow the model-specific installation documents and local building and fire requirements for clearances.

Expert help

Not sure which chimney route fits your sauna?

Send us the heater model and a simple room or roof plan. We’ll help identify the right product path before you order.

Talk to a Sauna Expert
This week at ZAPARA

Get a Free Quote

Project files Optional

    Your product: