Match the heater
Confirm the exact heater model, flue diameter and outlet position. A matching nominal diameter does not by itself confirm the installation.
Elbow + wall exit
Route illustration shown with a sauna stove. Heater not included.
Sauna chimney kit · Complete side-exit route
Chimney Kit with Elbow
SB225Complete elbow side-exit system
The SB225 provides the full turn-and-rise path for a side-exit installation: a 90° connection from the heater, an adjustable wall pass-through and an insulated vertical chimney stack outside.
$1,619.50CAD
Sauna heater, sauna stones, floor shield and wall heat shields are not included.
- Compatibility checkWe can review the heater and planned route before fulfilment.
- Canada-wide supportShipping options are confirmed for the destination.
Product overview
Complete elbow side-exit system
The SB225 sauna chimney kit with elbow is the complete side-exit option for layouts where the flue must turn from the wood-burning sauna heater and pass through the wall. The interior 90° elbow connects the heater route to the adjustable horizontal section; outside, the insulated tee and vertical stack carry the exhaust upward.
The package includes the transition and finishing components shown in the manufacturer system diagram, making it more complete than the CHISID stack-only route. The final configuration must still be checked against the selected heater, wall construction, chimney instructions and local requirements.
System components
What’s included
Components follow the manufacturer’s system diagram. Final quantities and section lengths should be checked for your installation.
- 0190° heater-side elbow and connector
- 02Adjustable 300–1,000 mm rigid wall section
- 03Interior and exterior finishing plates
- 04Insulated 90° tee with lower clean-out or drain
- 05500 mm and 1,000 mm insulated chimney sections
- 06Wall support bracket
- 07Chimney cap and top mounting tip
Technical reference
Chimney kit specifications
- Installation route
- 90° turn, through wall, then vertically outside
- Heater connection
- 115 mm (4.52 in)
- Insulated chimney outside
- 8 in (203 mm)
- Adjustable wall section
- 300–1,000 mm (11.8–39.4 in)
- Reference vertical sections
- 500 mm + 1,000 mm
Before you order
Confirm the complete installation route
Review the structure
Plan every ceiling, roof or wall penetration around the actual framing, finishes and required heat protection.
Follow the approved documents
The heater and chimney instructions plus applicable building and fire requirements govern the final clearances and assembly.
This route is a strong fit for
- Side-exit projects that need the heater-side 90° turn included
- Layouts where a roof penetration is not practical
- Projects needing an adjustable wall-through section
Compare routes
All sauna chimney kits
The three products solve different chimney paths. Choose the route first, then verify it against the heater and building.
Common questions
SB225 chimney kit FAQ
What is the difference between SB225 and CHISID?
SB225 includes the heater-side 90° elbow and adjustable connector needed for the complete side-exit route. CHISID is the outside stack and wall-transition solution for a route whose heater-side connection is specified separately.
Is the heater included in the displayed price?
No. The price is for the chimney kit. The heater, stones and protective shields are separate products.
Who should confirm the final chimney layout?
The heater and chimney instructions, the building construction and applicable local code must all be reviewed. ZAPARA can help identify the product route, but final installation requirements belong to the approved installation plan.
Expert help
Not sure which chimney route fits your sauna?
Send us the heater model and a simple room or roof plan. We’ll help identify the right product path before you order.
